Electric heating compound emergency flush eyewash deviceWJH0658-1

Electric heating compound emergency flush eyewash deviceWJH0658-1

Parameters
● Internal Material: SS304
● External Material: ABS Removable Shell
● Installation characteristic: With heat preservation and anti-freezing function, equipped with constant
thermostatic heating cable and temperature control system
● Usage : drenching body and rinsing faces / eyes can be operated separately or simultaneously
● Explosive-proof grade: EXD‖BT4/EXD‖BT6 /EXD‖CT4/ECD‖CT6(Customizable)
● Protection grade: IP55 / IP65(Customizable)
● Switch ball valve: SS304 ball valve
● Eyewash bowl features : 300 mm in diameter, vertical bowl-wall design, allows better water collecting
and anti-splashing
● Nominal pressure: 1.0Mpa
● Working pressure: 0.2-0.4 Mpa
● Testing pressure: 1.5 Mpa
● Flow rate of body shower : ≥76 L/min
● Flow rate of eye/face wash : ≥11.4 L/min
● Flow rate of eye wash : ≥1.5 L/min
● Inlet thread: DN32
● Outlet thread: DN25
● Inlet height: 170mm
● Outlet height: 100mm
● Water temperature of pipeline : 15°C~ 30°C

★ Product Feature:
① This product is suitable for use in areas that the temperature below 0°C.When the water temperature
is lower than 0°C, the tube body of the eye wash will automatically turn on the heating function to
remove the possibility that the temperature is too low to use or the damage.
② The water inlet is equipped with a flow alarm valve and an explosion-proof audible and visual alarm is
equipped at the top of the product.
③ An explosion-proof intelligent lighting device is installed at the nozzle end of the eye wash and use
light control switch device,in the case of effectively saving electricity, it is convenient for the injured to
use at night.
④ This product is equipped with polyurethane thermal insulation material for thermal protection,to
avoid the influence of external ambient temperature changes on the water temperature of the eyewash
pipe,more effective to ensure that the injured get appropriate water to wash their eyes.
⑤ The water source of the eye wash uses a centralized explosion-proof heating system to radiate
heat,the explosion-proof heating system has anti-dry burning, anti-leakage (automatically cut off the
power when leakage) and reliable temperature control function,it can effectively increase the water
temperature of eyewash 15°C and not higher than 38°C instantly.
⑥ The eye wash with automatic emptying device,the water in the eye wash system can be emptied in
15 seconds,more effectively improve the anti-freeze function of the eye washing system to ensure the
clean water sanitation.
★ Notes :The inlet part and outlet part are customizable ;shut off valve and filter are proposed to be
equipped on the water-supply end